MENU

Cash Acme Inlet Control Valve

This one piece inlet control incorporates several different control devices in one. It is specifically designed for use on an unvented system to control the incoming water supply to a hot water cylinder. It includes: a ‘droptight’ pressure reducing valve, meaning the valve will hold at the pre-set pressure regardless of whether under flow or no flow conditions and regardless of fluctuating inlet pressures.

It also incorporates a single check valve which will protect the system against backflow prevention up to fluid category 2, and a pre-set expansion relief valve which will prevent overpressurisation. The expansion relief valve is designed so it can rotate, to allow the discharge connection to be fitted in various directions making installation easier.

Some models have a connection for a balanced cold water take off which can allow the user to connect a cold water feed direct from the inlet control valve. Models available with a dedicated connection for an expansion vessel.

wras certified

Product Information

Product
Pressure
Size
Code
Inlet Control Valve With Cold Water Take Off & Vessel Connection
3.0/6.0Bar
22mm
CWIC200001
Inlet Control Valve With Cold Water Take Off & Vessel Connection
3.5/6.0Bar
22mm
CWIC200005
Inlet Control Valve With Cold Water Take Off & Compression Vessel Connection
3.0/6.0Bar
22mm
CWIC200010
Inlet Control Valve With Cold Water Take Off
3.0/6.0Bar
22mm
CWIC200020
Inlet Control Valve
3.0/6.0Bar
22mm
CWIC200030
Searching...
Products
Pages