Reliance's range of General Plumbing Products includes devices to allow control of flow, isolation and pressure and are all built using our high quality construction and expertise to maintain safe and efficient water supply in many environments.
The products dealt with in this section are the small but essential items that plumbing and heating systems cannot do without!
These products are used either to isolate systems when work needs to be carried out on them, or as service valves for individual products. Isolating valves should always be used with products that require maintenance work such as thermostatic mixing valves and thermostatic showers and pressure reducing valves.
The products that Reliance supplies are all ball valve operated which are of better quality and are longer lasting than rising spindle types. This also makes the pump isolating valves quite unique in the market place.
The valves contain PTFE seals and have high flow rates due to the 90-100% bore flow-through. The lever operated valves all have good-sized levers to enable them to be used as proper system isolation valves and are available with compression connections or female threaded connections up to 28mm and female only above 28mm. The products are either nickel-plated or brass.
Thermal Balancing Valve (TBV)
A thermostatic regulating valve for automatically balancing and maintaining optimum temperatures in potable hot water systems. Accessories also available.
Reliance 102 Series Potable Water Pressure Relief Valves
A range of potable water pressure relief valves with a wide range of inlet and outlet connection options and with pressures from 3.5 to 8.0 bar.
Reliance 104 Series High Capacity Potable Water Pressure Relief Valves
A range of high capacity potable water pressure relief valves with a wide range of inlet and outlet connections and pressures from 3.5 bar to 8.0 bar. Replacement cartridges available for 1/2" and 3/4" sizes.
Automatic Anti-Vacuum Valves
A compact, automatic vacuum relief valve for use with domestic hot water heaters.
Potable Water Manifolds
Compact potable water distribution manifolds, for use in domesticand commercial properties to evenly distribute flow throughout an installation.
A combination valve incorporating an isolator, large bore strainer and inline serviceable flow regulator.
A range of compact, class 3, in-line strainers. WRAS approved. 15mm, 22mm and 28mm sizes.
Testable Isolating Ball Valve
Nickel plated 22mm testable ball valves with compression connections.
Mini Isolating Ball Valves
Unplated or nickel plated high quality, screwdriver actuated isolating ball valve with compression connections. 15mm or 22mm sizes.
Floguard® Double Check Valve
Lightweight, WRAS approved compact double check valves for Class 3 contamination risks.