THERMOSTATIC TAPS
Caremix® S3 - Monobloc TMV3 Thermostatic Tap
A sequential TMV3 approved thermostatic tap for use on single hole basins to prevent scalding in high risk environments such as hospitals.
Use in high risk environments such as hospitals or nursing homes to prevent vulnerable people from being scalded by hot water.
Designed for ease of operation and installation.
Supplied complete with combination valves incorporating isolation, filtration, check valves and flow regulators.
Standard and Extended Lever for hospital use options available. Specification Sheet Caremix® T3 - Wall Mountable TMV3 Thermostatic Tap
A sequential TMV3 approved thermostatic tap typically used in areas with a panel system where the tap is mounted on a wall or panel with a void behind which carries the service pipework.
For use in high risk environments such as hospitals or nursing homes to prevent vulnerable people from being scalded by hot water.
Ease of operation and installation.
Incorporates isolation, filtration, check valves and flow regulators in the design of the body.
Standard and Extended Lever for hospital use options available. Specification Sheet Caremix® H3 - Deck Mounted 2 Hole TMV3 Thermostatic Tap
A sequential TMV3 approved thermostatic tap for use on two hole basins to prevent scalding by hot water in high risk environments such as hospitals.
For use in high risk environments such as hospitals and nursing homes to prevent vulnerable people from being scalded by hot water.
Ease of operation and installation.
Supplied complete with combination valves incorporating isolation, filtration, check valves and flow regulators.
Standard and extended lever option for hospital use options available. Specification Sheet Caremix® IR3 Infra-red TMV3 Thermostatic Tap
A wall mounted TMV3 approved infra-red (IR) thermostatic tap for use in healthcare environments.
Hands-free operation prevents cross contamination.
TMV3 approved.
Battery and mains operated versions available.
15mm connections.
Integral isolating valves, filters and flow regulators. Specification Sheet THERMOSTATIC SHOWERS AND FITTINGS
Heatguard® DC153 TMV3 Shower
A TMV3 approved exposed shower with dual control, ideal for use in healthcare environments.
TMV3 approved shower valve for safe use in installations where users are deemed to be at risk.
Unique, easy to use separate controls unlike conventional ring within ring design.
Single piece thermostatic cartridge maintains excellent temperature control whilst simplifying maintenance thus reducing downtime.
Push-fit connections make for easy installation reducing site time.
Rotational elbows with a choice of top, bottom or rear inlets gives freedom of installation.
120° ceramic disc flow control for easy operation.
Top or bottom outlets can be changed on site for complete flexibility of installation.
WRAS, Buildcert, and NHS Estates TMV3 Approved. Specification Sheet Heatguard® CS3 TMV3 Shower
A TMV3 approved concealed shower with dual control, ideal for use in healthcare premises.
TMV3 approved shower valve for safe use in installations where users are deemed to be at risk.
Single piece thermostatic cartridge with integral sleeve strainers simplifying maintenance thus reducing downtime.
Stable temperature management and quick reaction to changing supply conditions.
Wax element thermostatic technology reduces risk of scalding.
Long lasting ceramic disc flow control for easy operation.
WRAS, Buildcert, and NHS Estates TMV3 Approved.
Comes complete with internal isolators and check valves, which are accessible from the front. Specification Sheet Showerguard® RW153HC
A sequential single control shower control which is TMV3 approved and is ideal for sheltered accommodation.
Works on all domestic hot water systems, at pressures from 0.1 to 5.0 bar.
Supplied complete with flow restrictors.
Up to 8 litres per minute at 1 metre head.
Rapid shut off on hot or cold supply failure.
Easy to install with 360 degree swivel elbows.
Simple to operate with single control for both flow and temperature.
Brass body and internals.
Fully serviceable.
Full range of fitting options available.
WRAS, Buildcert, and NHS Estates TMV3 Approved. Specification Sheet Heatguard® DC150 Shower Valve
Ultra modern, streamlined exposed shower with dual control. Especially designed to give excellent flow rates at low pressures.
Unique, easy to use separate controls unlike conventional ring within ring design.
Single piece thermostatic cartridge maintains excellent temperature control whilst simplifying maintenance thus reducing downtime.
Good flow rates even at low pressures (10 Ipm at 0.1 bar)
Push-fit connections make for easy installation reducing site time.
Rotational elbows with a choice of top, bottom or rear inlets gives freedom of installation.
120 degrees ceramic disc flow control for easy operation.
Top or bottom outlets can be changed on site for complete flexibility of installation.
Complies with EN1111 and 1287.
WRAS approved. Specification Sheet Contemporary Heatguard® CS (Concealed Shower)
A contemporary style concealed shower with dual control. Uses wax element thermostatic technology.
Thermostatic cartridge for ease of service.
Wax element thermostatic technology reduces risk of scalding.
Stable temperature management and quick reaction to supply change.
Accurate user set temperature to plus or minus 2 deg C.
Thermostatic cartridge with integral sleeve strainers.
High flow rate of 8 L/M @ 0.1 bar.
Flow control assured by long lasting ceramic disc cartridge.
Temperature displayed on the control in deg C.
Integral isolators for speed of maintenance.
Complies with EN1111 and 1287.
WRAS approved.
A full range of fittings and accessories is available. Specification Sheet Contemporary Heatguard® BSM (Bath Shower Mixer)
A modern style bath shower mixer designed for domestic applications.
Thermostatic cartridge for ease of service.
Wax element thermostatic technology reduces risk of scalding.
Stable temperature management and quick reaction to supply change.
Accurate user set temperature to plus or minus 2 deg C.
Thermostatic cartridge with integral sleeve strainers.
Flow control assured by long lasting ceramic disc cartridge.
Temperature displayed on the control in deg C.
Complies with EN1111 and 1287.
WRAS approved.
A full range of fittings and accessories is available. Specification Sheet Contemporary Shower Fittings
Low and high pressure Contemporary handsets, hoses, slider rails, wall brackets and outlet elbows, available in chrome finishes.
5 different spray patterns - normal, pulse massage, champagne, combi pulse, combi champagne.
Easily removed head, one click action.
Self cleaning - contains integral rubber plate which helps prevent lime scale build up.
Removable shower head (one click action) for ease of maintenance.
Integral anti-twist connector, covering all plumbing systems.
High and low pressure options. Specification Sheet
